How To Change Code On Door Lock Weiser

Press the program button on the interior unit three times.

How to change code on door lock weiser. Fl ashes green (about 5 seconds). For instuctions on how to add user codes when the mastercode is disabled, see the installation and user guide that came with your lock. If unsuccessful make sure to enter the same valid code in steps 3 and 5.

The lock beeps, the keypad fl ashes red, and the door cannot lock or unlock. If you have an old weiser lock that does not have the smart key feature, you'll have to remove the lock from the door to rekey it. Hold these two units in place, then insert screws into the interior side of the lock to fasten it to the door.

Install the smart door lock using the manufacturer’s installation guide provided in the box. 3 enter user code to be deleted. Just go through all the possible combinations and unlock it (only if its a 3/4 digit) on the other hand if you do know the code and want to change the lock, hold down the unlock button/lever and change the digits and that should change the code.

Smartcode at a glance deleting a single user code Locked turnbutton the turnbutton cannot rotate. To start over, touch the lock button to lock the door.

38 mm (1 1/2 in). Prepare the door and check dimensions. Insert the exterior (keyed) side of the lock through the exterior side of your door.

Page 6 62816 / 01 troubleshooting: Measure to con irm that the hole in. If drilling a new door, use the supplied template and the complete.